Free shipping on orders over $49
Tillbaka till bloggen
Gör-det-själv-guider 2026-11-20 Audio Advisor | Turntables, Speakers, Headphones & Hi-Fi Equipment 0 visningar

iFi iPower2 12V Setup: Clean Power for Hi-Fi Gear

iFi iPower2 12V Setup: Clean Power for Hi-Fi Gear

Learn how to set up the iFi iPower2 12V power supply for streamers, DACs, and turntables. Check voltage, current, and polarity before ordering.

Why Replace the Wall-Wart?

Most streamers, DACs, phono stages, and turntables ship with a generic switch-mode wall-wart. It's often the cheapest component in the box, and it feeds some of the most sensitive circuits you own. These supplies are electrically noisy by design, and that noise can ride into the component's ground plane and analog stages, showing up as hiss, a grainy edge to the treble, and a background that never goes fully quiet.

Replacing that wall-wart with a cleaner DC supply takes about a minute and works on gear you already own—making it one of the most efficient upgrades in the hobby. The iFi iPower2 12V is a fixed-voltage supply that uses Active Noise Cancellation II to reduce noise at both input and output stages, landing at an audio-band noise floor of roughly 1 microvolt.

Before You Order: Check Voltage, Current, and Polarity

The iPower2 is available in 5V, 9V, 12V, and 15V versions. There's no switch or adjustment—each version outputs one voltage only. Voltage must match exactly; connecting a 15V supply to a 9V component can damage it. So the first step is to look at the label on your component's DC input or on its original power supply. It will list a voltage and a current rating.

Match the voltage exactly and make sure your component's current draw is at or below the iPower2's rating for that voltage. For the 12V version, that's up to 1.8A. If your component needs a voltage other than 5V, 9V, 12V, or 15V, this is not the right product.

Also check polarity. Most home and pro audio gear is center-positive, but some components are center-negative. The iPower2 includes a white reverse-polarity adapter for center-negative components. If you're unsure, check the user guide or call us and we'll look it up with you.

iFi iPower2 12V at a Glance

  • iFi iPower2 Power Supply - 12 Volt: Output: 12V/1.8A (fixed—specify at order) This confirms the 12V version's current capacity, so you can verify your component's draw stays within limits.
    iFi iPower2 Power Supply - 12 Volt
    iFi iPower2 Power Supply - 12 Volt
  • iFi iPower2 Power Supply - 12 Volt: Input: 100–240V AC (universal) Works worldwide without a step-down transformer, simplifying setup in any country.
  • iFi iPower2 Power Supply - 12 Volt: Included barrel adapters: 3.5 × 1.35mm, 4.0 × 1.7mm, 4.8 × 1.7mm, 5.5 × 2.1mm, 5.5 × 2.5mm Covers roughly 73% of DC plugs in circulation, so you likely have the right tip for your component.
  • iFi iPower2 Power Supply - 12 Volt: Polarity: Center positive, with white reverse-polarity adapter included Ensures you can power center-negative gear like effects pedals without extra purchases.

Step-by-Step Setup for the iFi iPower2 12V

Once you've confirmed the voltage, current, and polarity, setup is straightforward.

  1. Confirm compatibility: Double-check that your component's DC input matches 12V and that its current draw is ≤1.8A. Also note the polarity symbol.
  2. Select the right barrel adapter: Choose from the five included adapters the one that fits your component's DC jack. If unsure, measure the plug's outer and inner diameters.
  3. Connect the adapter: Attach the chosen DC barrel adapter to the iPower2's cable. If your component is center-negative, use the white reverse-polarity adapter.
  4. Plug in and power up: Connect the iPower2 to your component's DC input, then plug the supply into a wall outlet. The supply operates on 100–240V AC, so no voltage selector is needed.

What the iPower2 12V Does—and What It Doesn't

The iPower2 12V is designed for network players, DACs, routers, and many turntables that require 12V DC. Its Active Noise Cancellation II works at both input and output stages, cancelling incoming EMI and RFI. The result is a cleaner, quieter power feed that can reduce hiss and grain in your audio.

However, it's not a universal solution. If your component needs a different voltage or draws more current than the 12V version provides, this product won't work. Also, while the iPower2 includes adapters for many DC plugs, it may not fit every connector—check your component's jack size before ordering.

Relaterade artiklar

Customer Service
Hem
Produkter
Varukorg
Profil